ICP-10110

High Accuracy, Low Power, 10 atm Waterproof Barometric Pressure & Temperature Sensor IC

Note: The ICP-10110 is not recommended for new designs.

The ICP-10110 barometric pressure sensor is based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 5 cm, less than the height of a single stair step.

Consuming only 1.3 µA @1 Hz, available in a small footprint 2 × 2.5 × 0.92 mm waterproof to 1.5m depth 8-pin LGA package, the ICP-10110 is ideally suited for mobile phones, wearable fitness monitoring, drones, and battery powered IoT.

The ICP-10110 offers an industry leading temperature coefficient offset of ±0.5 Pa/°C. The combination of high accuracy, low power, temperature stability, waterproofing in a small footprint enables higher performance barometric pressure sensing for sports activity identification, mobile indoor/outdoor navigation, and altitude-hold in drones.

• Pressure operating range: 30 to 110 kPa
• Noise and current consumption:
  • 0.4 Pa @ 10.4 μA (ULN mode)
  • 0.8 Pa @ 5.2 μA (LN mode)
  • 3.2 Pa @ 1.3 μA (LP mode)

• Pressure Sensor Relative Accuracy: ±1 Pa for any 10 hPa change
• Pressure Sensor Absolute Accuracy: ±1 hPa
• Pressure Sensor Temperature Coefficient Offset: ±0.5 Pa/°C
• Temperature Sensor Absolute Accuracy: ±0.4°C
• IPx8: Waterproof to 1.5m depth