Developer Registration

Account Information
Email verification required. Corporate email required if representing a company
Must have minimum 8 characters that include at least one uppercase letter, lowercase letter, number, and symbol

Personal Information

Company / School Info

Other Information

Software License Agreement

Please read the following license agreements and scroll down to the bottom of the document to agree to its terms and conditions. Once you agree, your download will begin.

IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THE FOLLOWING AGREEMENTS CAREFULLY BEFORE DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING THE SOFTWARE, DEVELOPER KITS, SUPPORT PACKAGES, REFERENCE DESIGNS, DOCUMENTATION, AND/OR ANY OTHER MATERIALS AVAILABLE AND DOWNLOADED BY YOU FROM THE INVENSENSE “DEVELOPERS PAGE” (https://invensense.tdk.com/developers) (“LICENSED MATERIALS”). THE LICENSED MATERIALS ARE FOR USE SOLELY AND EXCLUSIVELY WITH INVENSENSE OR CHIRP PRODUCTS. IF YOU DO NOT AGREE TO ALL OF THE TERMS AND CONDITIONS OF THE FOLLOWING AGREEMENTS, YOU MUST NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THE LICENSED MATERIALS.

If you are accepting these License Agreements on behalf of a company or other legal entity, you represent that you have the legal authority to bind the legal entity to these License Agreements, and in which case “you” or “your” shall mean such entity. If you do NOT have such authority or if you disagree with any of the terms contained herein, InvenSense and Chirp do not grant you a license to use the Licensed Materials.

By selecting “I AGREE” below, or by downloading, installing, copying or otherwise using the Licensed Materials, Licensee acknowledges that it, he or she has read all of the terms and conditions of the following Agreements, understands them, and agrees to be bound by them.

A. INVENSENSE LICENSE AGREEMENT: FOR INVENSENSE EMBEDDED MOTIONAPPS™, MOVEA TV SOLUTION, EMBEDDED MOTION DRIVERS, AAR™ LIBRARY

The following License Agreement (“Agreement”) is a binding legal agreement between InvenSense, Inc. located at 1745 Technology Drive, Santa Clara, CA 95110 USA (“InvenSense”) and you (both the individual installing the Software and any single legal entity on behalf of which such individual is acting) (“Licensee”).

  1. PURPOSEThis Agreement provides the terms and conditions for Licensee’s licensing of the following InvenSense software libraries downloaded by Licensee: Embedded MotionApps™, Embedded MotionDrivers, MoveaTV Solution™, and/or AAR™ Library and any related documentation (the “Documentation”) provided by or on behalf of InvenSense.
  2. DEFINITIONS
    1. “Binary Code” means those portions of Software that are provided to Licensee in binary or object code (i.e., machine readable) form.
    2. “Confidential Information” means (i) the Software, and any portions, components or sub- files thereof; (ii) the structure, sequence and organization of the Software and the concepts, methods of operations and ideas disclosed therein; (iii) any trade secrets of InvenSense or its affiliates or its or their suppliers relating to the Software; (iv) the Documentation, and (v) the terms and conditions of this Agreement.
    3. “Documentation” means the instructional documentation for the Software provided to Licensee by or on behalf of InvenSense.
    4. “InvenSense Product” means the InvenSense motion processing devices specified on Exhibit A that are purchased by Licensee.
    5. “Licensed Materials” means the Software and the Documentation.
    6. “Licensee Application(s)” means Licensee applications designed for complete sensor system on chip and microcontroller-based platforms that will incorporate the Software (in Binary Code only) solely for use with InvenSense Product(s) therein.
    7. “Modification” means any modification, derivative work, improvement or enhancement of the Licensed Materials created by or for Licensee.
    8. “Software” means the software known as Embedded MotionApps™, Embedded MotionDriver, InvenSenseTV, SmartMotion®, and/or MotionLink that is generally made available by InvenSense from its Developer Page website and downloaded by Licensee as such software exists as of the date of download and any modifications or updates thereto that InvenSense may make generally available hereunder from time to time in its sole discretion.
    9. “Source Code” means those portions of the Software, if any, that are provided to Licensee in source code (i.e., human readable) form.
    10. “Subcontractor(s)” means Licensee’s third-party contract manufacturer(s) or ODM(s) which are bound to written confidentiality and such other restrictions with respect to the Software and other InvenSense confidential information no less stringent than those contained in this Agreement.
  3. USE OF LICENSED MATERIALS.License Grants. Subject to and conditioned on Licensee’s compliance with the terms and conditions of this Agreement, InvenSense grants to Licensee, under InvenSense’s copyrights embodied in the Licensed Materials, the following non-exclusive, non-transferable, non- sublicensable rights to:(a) incorporate the Software into Licensee Applications solely for use with the InvenSense Products included in such Licensee Applications;

    (b) with respect only to Software provided to Licensee in Source Code, execute, reproduce and modify the Source Code and compile such modified or unmodified Source Code, to the extent needed to incorporate the Software into Licensee Applications in accordance with clause (a) above;

    (c) use the Documentation and make a reasonable number of copies of the Documentation as reasonably necessary to exercise Licensee’s license rights granted in clause (a) and (b) above;

    (d) demonstrate the Software solely as incorporated into Licensee Applications and used with the InvenSense Product to actual and prospective customers of Licensee; and

    (e) distribute the Software solely as incorporated in Licensee Applications solely and exclusively for use with InvenSense Products included therein to actual customers of Licensee.

    Subcontractors. Licensee may engage Subcontractors to exercise Licensee rights in Section 3.1(a), (b) and (c) above.

  4. CONDITIONS TO LICENSE GRANTS AND OTHER TERMS
    1. Compliance with Other Terms and Conditions. The rights granted to Licensee in this Agreement are conditioned on Licensee’s ongoing compliance with the terms and conditions of this Agreement and of any terms and conditions of sale or other documents provided by or on behalf of InvenSense to Licensee in connection with Licensee’s purchase of InvenSense Product(s), including Licensee’s payment of fees required under such terms and conditions of sale or other documents.
    2. Restrictions. Licensee agrees to use the Licensed Materials only as permitted in this Agreement. Licensee will have no right to, and will not, (a) transfer, sublicense, distribute, modify, translate, create derivative works of or reproduce Software or Documentation (or any portions thereof) except as expressly permitted in Section 3; (b) decompile, reverse engineer or disassemble the Binary Code; or (c) take any actions, including combining or distributing the Software with open source software, that would cause the Software or any portion thereof to become subject to the GNU General Public License or any other open source license that imposes any limitation, restriction or condition requiring that the Software combined or distributed with such open source software: (i) be disclosed or distributed in source code form; (ii) be licensed on terms inconsistent with the terms of this Agreement. Licensee will not remove, obscure or alter any InvenSense trademark, copyright or other marking from the Licensed Materials, and Licensee will reproduce, to the extent commercially reasonable, all such marks and proprietary rights and ownership notices on all copies of the Licensed Materials made by or for Licensee. Licensee agrees not to use the Licensed Materials with any integrated circuit device other than the InvenSense Products (except that incidental interaction by the Software with other components or software included in the Licensee Applications is permitted).
    3. Ownership. Licensee acknowledges and agrees that InvenSense (and/or its licensors) retains and will own all right, title and interest, including all intellectual property rights, in and to the Licensed Materials and any modifications or derivative works of the Licensed Materials that are developed by or for InvenSense (including any based on the Modifications or Licensee feedback). Licensee has, and shall acquire, no rights in the foregoing except those expressly granted in Section 3 under this Agreement. Licensee acknowledges and agrees that InvenSense shall not be restricted from selling, licensing, modifying, or otherwise distributing the Licensed Materials to any third party.
    4. No Implied Rights. Other than the copyright licenses expressly granted to Licensee in Section 3 with respect to Licensed Materials, no right, license, authority or immunity of any kind is granted (or deemed assigned or granted) by InvenSense to Licensee or any third party (whether by implied license, estoppel, exhaustion, or otherwise and whether under this Agreement, as a result of the activities related thereto, or otherwise) under any of InvenSense’s patents and other intellectual property rights even if such patent or other rights are practiced (whether necessarily or otherwise) by the Licensed Materials or their permitted use in connection with the exercise of the rights expressly granted in Section 3. Licensee acknowledges and agrees that Licensee has no such rights and will not assert (or assist or permit any third party to assert) any position to the contrary.
    5. Licensee Intellectual Property Rights. Licensee and its affiliates shall not assert any intellectual property rights in or relating to Licensed Materials or Modifications and/or parts thereof against InvenSense or its affiliates or its or their respective direct and indirect licensees, suppliers, manufacturers, distributors, contractors, customers or end users (all including their affiliates). Should Licensee or any of its affiliates bring a claim against InvenSense or any of the protected persons described above for infringement or misappropriation of any intellectual property rights in any Licensed Materials or Modifications and/or parts thereof, InvenSense will be entitled to terminate all licenses granted hereunder with immediate effect upon notice to Licensee, and all the licenses granted up to the date of such notice will cease to have any effect.
    6. Modifications. Subject to InvenSense’s underlying ownership in the Software and grantback license below, Licensee shall retain ownership of all Modifications. While Licensee and its affiliates are under no obligation to disclose or deliver any Modifications to InvenSense, Licensee agrees to provide to InvenSense, at InvenSense’s request, information necessary for InvenSense to determine whether Licensee complied with its obligations herein with respect to the use of Modifications. As to any Modification that Licensee or its affiliates create, disclose, deliver or otherwise provide access or make available to InvenSense or its affiliates or other customers, Licensee (on behalf of itself and its affiliates) hereby grants to InvenSense and its affiliates a fully paid, royalty-free, worldwide, fully exhaustive, perpetual, irrevocable, sublicensable, unrestricted right and license to use, copy, modify, create derivative works, distribute, sell and otherwise commercialize the Modification and all intellectual property rights therein. InvenSense will not have any obligation to keep the Modifications confidential, regardless of anything to the contrary in any agreement between Licensee and InvenSense.
    7. Feedback. InvenSense and its affiliates will have an unlimited, perpetual, non-exclusive, worldwide, transferable and sublicensable right to use and employ in its development, commercialization and any exploitation of the Licensed Materials and any other products and services all comments, bug reports, suggestions, ideas and other feedback that Licensee may provide to InvenSense or its affiliates concerning the Licensed Materials or Modifications.
    8. Confidential Information. Licensee will not disclose any Confidential Information to any third party (except Subcontractors, as permitted herein) or use Confidential Information except as expressly permitted in this Agreement. Licensee agrees to take all reasonable measures to protect Confidential Information and prevent its unauthorized disclosure, including measures at least as stringent as those measures Licensee takes to protect Licensee’s own most sensitive confidential information. Licensee agrees to restrict access to Confidential Information to Licensee employees and Subcontractors who are under obligations to protect Confidential Information in accordance with this Agreement and who have a “need to know” the Confidential Information to exercise Licensee license rights in this Agreement. All Confidential Information, and any documents and other tangible objects containing or representing Confidential Information, and all copies of Confidential Information, are and will remain the exclusive property of InvenSense.
    9. Responsibility for Subcontractors. Licensee is responsible to ensure that Subcontractors comply with the terms and conditions of this Agreement. Any act or omission by a Subcontractor that would be a breach of this Agreement by Licensee if Licensee performed the act will be deemed a breach of this Agreement by Licensee.
    10. No Endorsement. Licensee may not use InvenSense’s name to endorse or promote products derived from the Licensed Materials without specific prior written permission.
  5. UPDATESAt its discretion, InvenSense may provide Licensee with upgrades or updates to the Licensed Materials during the term of this Agreement (and such upgrades or updates will be included in the relevant category of, and become subject to the same terms and conditions as, Licensed Materials under this Agreement). However, InvenSense is under no obligation to provide any support or maintenance for the Licensed Materials and the Licensed Materials are provided to Licensee with no obligation whatsoever on the part of InvenSense to fix bugs, notify Licensee of known bugs now or in the future, update the Licensed Materials, or port the Licensed Materials to any other operating system, device, or hardware.
  6. DISCLAIMER OF WARRANTIESTO THE FULLEST EXTENT PERMITTED BY LAW, THE LICENSED MATERIALS ARE PROVIDED TO LICENSEE ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. FOR THE SAKE OF CLARITY, INVENSENSE AND ITS AFFILIATES AND ITS AND THEIR SUPPLIERS DO NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS (A) REGARDING THE USE, OR THE RESULTS OF THE USE, OF ANY OF THE LICENSED MATERIALS IN TERMS OF CORRECTNESS, COMPLETENESS, ACCURACY, RELIABILITY, OR OTHERWISE, AND (B) THAT THE LICENSED MATERIALS HAVE BEEN TESTED FOR COMPLIANCE WITH ANY REGULATORY OR INDUSTRY STANDARD, INCLUDING WITHOUT LIMITATION ANY SUCH STANDARDS PROMULGATED BY THE FCC OR OTHER LIKE AGENCIES. THE SOFTWARE IS NOT DESIGNED, INTENDED, OR AUTHORIZED FOR USE IN ANY TYPE OF SYSTEM OR APPLICATION IN WHICH THE FAILURE OF THE SOFTWARE COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR (E.G. MEDICAL SYSTEMS, LIFE SUSTAINING OR LIFE SAVING SYSTEMS).
  7. LIMITATION OF LIABILITYTO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT WILL INVENSENSE OR ANY OF ITS AFFILIATES OR ITS OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION BASED ON CONTRACT, TORT OR OTHERWISE, ARISING FROM OR RELATING TO THIS AGREEMENT OR THE LICENSED MATERIALS (INCLUDING, WITHOUT LIMITATION, FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER LOSS) IN EXCESS OF ONE HUNDRED UNITED STATES DOLLARS (US$100) IN THE AGGREGATE, EVEN IF INVENSENSE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CLAIM, DAMAGES, OR LIABILITY. NOTWITHSTANDING ANYTHING TO THE CONTRARY AND REGARDLESS OF THE CAUSE IN LAW, INVENSENSE WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY DAMAGES ARISING FROM INTERRUPTED OPERATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF CAPITAL AND/OR LOSS OF INFORMATION AND DATA INCURRED BY LICENSEE OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT OR OTHER THEORY OF LIABILITY, EVEN IF THE OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  8. TERM AND TERMINATION
    1. Term. This Agreement will continue in effect until terminated as described below in this Section 8.
    2. Termination by Licensee. Licensee may terminate this Agreement with immediate effect upon written notice of termination to InvenSense.
    3. Termination by InvenSense. InvenSense may terminate this Agreement with immediate effect upon written notice to Licensee with no liability to Licensee if (a) Licensee breaches any term of this Agreement or (b) Licensee is acquired, merged, or undergoes a change of control (and Licensee agrees to notify InvenSense of any such transaction).
    4. Surviving Terms. The following provisions will survive termination or expiration of this Agreement: Section 4, Section 6, Section 7, Section 8, Section 9 and Section 10.
    5. Return of Materials. Immediately upon termination or expiration of this Agreement, Licensee agrees to return to InvenSense all copies of the Licensed Materials, or at InvenSense’s request, destroy all Licensed Materials. If InvenSense so requests, Licensee agrees to have an executive of Licensee provide InvenSense with a letter stating that all copies of the Licensed Materials have been returned or destroyed.
  9. INDEMNITY.Licensee agrees to indemnify and hold harmless InvenSense and its affiliates and its and their officers, directors, customers, employees and successors and assigns (each an “Indemnified Party”) against any and all claims, demands, causes of action, losses, liabilities, damages, costs and expenses, incurred by the Indemnified Party (including but not limited to costs of defense, investigation and reasonable attorney’s fees) arising out of, resulting from or related to (i) the download, distribution, installation, storage, execution, use or transfer of the Licensed Materials, and all related products, documentation, content, materials or derivative works by any person or entity, and/or (ii) any breach of this Agreement by Licensee. If requested by an Indemnified Party, Licensee agrees to defend such Indemnified Party in connection with any third party claims, demands, or causes of action resulting from, arising out of or in connection with any of the foregoing.
  10. MISCELLANEOUS PROVISIONS.
    1. Notices. All notices required hereunder will be in writing and, if to InvenSense, will be sent by (a) U.S. mail (first class), (b) nationally recognized courier service (e.g., DHL, Federal Express), with all postage or delivery charges prepaid, subject to confirmation via U.S. mail or nationally recognized courier service, or if to Licensee, by (a) electronic mail, (b) U.S. mail (first class), (c) nationally recognized courier service (e.g., DHL, Federal Express), or (d) by notice posted on the InvenSense “Developer’s Page” website (https://invensense.tdk.com/developers) (such notice shall be deemed to have been received by Licensee five (5) business days after it has been posted). Notices to InvenSense will be addressed to Attn: InvenSense Legal Department, 1745 Technology Drive, San Jose, CA 95110, USA or to such other address(es) as may be furnished by written notice in the manner set forth her; and notices to Licensee, if mailed, will be sent to the physical or email address supplied by Licensee as part of Licensee’s registration to InvenSense’s “Developers Page,” or to such other address(es) as may be furnished by written notice in the manner set forth herein. Notices will be deemed to have been served when delivered or, if delivery is not performed as a result of the addressee’s fault, when tendered.
    2. United States Government End Users. The Licensed Materials are “Commercial Items(s)” as defined in 48 C.F.R. § 2.101, consisting of “Commercial Computer Software” and “Commercial Computer Software Documentation,” as such terms are used in 48 C.F.R. § 12.212 or 48 C.F.R. § 227.7202, as applicable. Consistent with 48 C.F.R. § 12.212 or 48 C.F.R. § 227.7202 1 through 227.7202 4, as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. If Licensee is licensing the Licensed Materials for acquisition by the U.S. Government or any contractor therefor, Licensee must license consistent with the policies set forth in 48 C.F.R. § 12.212 (for civilian agencies), and 48 C.F.R. § 227.7202 1 and 227.7202 4 (for the Department of Defense), and their successors.
    3. Representations and Warranties. Licensee represents and warrants that Licensee has the right to enter into this Agreement and to meet Licensee obligations under this Agreement.
    4. Governing Law; Venue. Any and all disputes arising out of or related to this Agreement, including but not limited to the interpretation, validity, enforceability and performance of this Agreement, will be governed by and construed in accordance with the law of the State of California, without regard to or application of any of California’s conflict of law rules. Any legal suit, action or proceeding arising out of or relating to this Agreement will be commenced in the federal courts in the Northern District of California or in the state courts in Santa Clara County, California, and each party hereto irrevocably submits to the jurisdiction and venue of any such court in any such suit, action or proceeding. Notwithstanding the foregoing, InvenSense may seek interim or injunctive relief in any court of competent jurisdiction to protect its intellectual property rights.
    5. Severability; Waiver. If any provision of this Agreement is determined to be invalid, unenforceable, overbroad, or illegal, the validity or enforceability of the other provisions will not be affected and any the affected provision will be construed by limiting or reducing it, so as to be enforceable with applicable law. No waiver by InvenSense of any right under this Agreement will be construed as a waiver of any other right or breach. Licensee must comply with all applicable laws regarding use of the Licensed Materials (including without limitation all US and international export laws). All of InvenSense’s rights, disclaimers, and limitations of liability under this Agreement and with respect to the Licensed Materials will also apply to any component or portion of the Licensed Materials.
    6. Assignment. InvenSense may assign to another person or entity this Agreement or any of its rights under this Agreement in whole or in part. Licensee may not assign, sublicense, or transfer this Agreement or any of Licensee’s rights hereunder to any third party, without InvenSense’s express prior written consent, which may be withheld in InvenSense’s sole discretion. This Agreement will be binding upon Licensee and Licensee heirs, executors, administrators, and successors, and will inure to the benefit of all successors and assigns of InvenSense.
    7. Entire Agreement; Amendment. This Agreement, including all Exhibits hereto, constitutes the entire agreement and understanding of the Licensee and InvenSense with respect to the subject matter hereof, and supersedes all prior and contemporaneous correspondence, negotiations, agreements and understandings between Licensee and InvenSense, and any representations and warranties, both oral and written. Notwithstanding the foregoing, if Licensee has entered into a separate confidentiality agreement or non‐disclosure agreement with InvenSense with respect to the confidentiality of the Licensed Materials, then that agreement will continue to apply with respect to that subject matter to the extent that it is more protective of the confidentiality of the Licensed Materials than this Agreement. No modification, cancellation, or amendment of this Agreement will be binding unless executed in writing (referencing this Agreement) by Licensee and a duly authorized officer of InvenSense.
>Exhibit A:

Licensed Material is permitted to be used solely and exclusively with the following InvenSense Products:
IAM-20380, IAM-20381, IAM-20680, ICG-1020/1P, ICG-1020/1S, ICG-20330, ICG-20660/L, ICM-20600, ICM-20601, ICM-20602, ICM-20603, ICM-20608, ICM-20608-G, ICM-20609, ICM-20648, ICM-20649, ICM-20655, ICM-20689, ICM-20690, ICM-20789, ICM-20948, ICM-42605, IDG-2020/1, IDG-2030U, IMU-3000, ISZ-2510, ITG-1010, ITG-3050, ITG-3200, ITG-3701, IXZ-2510, MPU-3050, MPU-3300, MPU-6000, MPU-6050, MPU-6500, MPU-6555, MPU-9150, MPU-9250, MPU-9255
*Notes: Additional devices may be added in Exhibit A at the sole discretion of InvenSense as long as written notice is provided in accordance with the Agreement.

B. CHIRP LICENSE AGREEMENT FOR CHIRP SONICLIB, CH-101 GPR SENSOR FIRMWARE, CHIRP SMARTSONIC BSP

The following License Agreement (“Agreement”) is a binding legal agreement between Chirp Microsystems, Inc., located at 2650 Ninth Street, Suite 220A, Berkeley, CA 94710 USA (“Chirp”), and you (both the individual installing the Software and any single legal entity on behalf of which such individual is acting) (“Licensee”).
The License terms here are the same as the InvenSense License Agreement in Part A except that:

(a) Section I, Purpose is replaced as follows: This Agreement provides the terms and conditions for Licensee’s licensing of the following Chirp software libraries downloaded by Licensee: Chirp SonicLib, CH-101 GPR Sensor Firmware, Chirp SmartSonic BSP and any related documentation (the “Documentation” provided by or on behalf of Chirp.

(b) 2.4 is replaced as follows: “Chirp Product” means the Chirp devices specified in the following Exhibit A that are purchased by Licensee;

(c) 2.8 is replaced as follows: “Software” means the software known as Chirp SonicLib, CH-101 GPR Sensor Firmware, Chirp SmartSonic BSP that is generally made available by Chirp through the InvenSense Developer Page and downloaded by licensee as such software exists as of the date of download and any modifications or updates thereto that Chirp may make generally available hereunder from time to time in its sole discretion.

(d) All references to InvenSense are replaced herein with Chirp.

Exhibit A:
Licensed Material is permitted to be used solely and exclusively with the following Chirp Products: CH101, CH201.
*Notes: Additional devices may be added in Exhibit A at the sole discretion of Chirp as long as written notice is provided in accordance with the Agreement.

C. EVALUATION ONLY LICENSE AGREEMENT FOR CHIRP SONICLINK

The following License Agreement (“Agreement”) is a binding legal agreement between Chirp Microsystems, Inc., located at 2650 Ninth Street, Suite 220A, Berkeley, CA 94710 USA (“Chirp”), and you (both the individual installing the Software and any single legal entity on behalf of which such individual is acting) (“Licensee”).
The License terms here are the same as the Chirp License Agreement in Part B except that:

(a) Section 1 (Purpose) is replaced as follows: This Agreement provides the terms and conditions for Licensee’s licensing of the following Chirp software libraries downloaded by Licensee: Chirp SonicLink (SonicLink PC GUI and SmartSonic board firmware) and any related documentation (the “Documentation” provided by or on behalf of Chirp.

(b) Section 2.8 is replaced as follows: “Software” means the software known as Chirp SonicLink that is generally made available by Chirp through the InvenSense Developer Page and downloaded by licensee as such software exists as of the date of download and any modifications or updates thereto that Chirp may make generally available hereunder from time to time in its sole discretion.

(c) Section 3.1 is replaced in its entirety as follows:

Section 3.1 Limited License Grant. Subject to and conditioned on Licensee’s compliance with the terms and conditions of this Agreement, Chirp hereby grants to Licensee for the term of this Agreement, a temporary, non-exclusive, non-transferable, non-sub-licensable, limited license to:(a) use internally and reproduce Chirp SonicLink Software and create Modifications solely for optimizing the Chirp SonicLink Software in conjunction with Licensee Products that use Chirp Products; and (b) copy and distribute Chirp SonicLink Software to allow for sampling and testing of Licensee Products, provided that in each instance the Chirp SonicLink Software and Modifications are distributed solely and exclusively in Binary Code and embedded in Licensee Products that utilize Chirp Products. Other than as provided in this Section 3.1, no license under any of Chirp’s trade secret, patent, copyright, mask work right, or other intellectual property right is granted to or conferred upon Licensee for its use of Chirp SonicLink Software, either expressly, by implication, inducement, estoppel, or otherwise, and that any further license under such intellectual property rights must be express and in writing. Apart from this limited license, it is expressly forbidden to otherwise use the Chirp SonicLink Software provided. Licensee may NOT engage Subcontractors to exercise any of Licensee’s rights herein. For the avoidance of doubt, in the event that Licensee wishes to distribute the Chirp SonicLink Software for any commercial use other than the limited evaluation rights described above, Licensee and Chirp must sign a separate written agreement granting those rights.

Exhibit A: Licensed Material is permitted to be used solely and exclusively with the following Chirp Products: CH101, CH201.

Terms of Use

Last updated: February 11, 2020

By accessing, browsing, using, and/or downloading materials from the InvenSense website (hereinafter, the “Website”), the user (“you”) acknowledges acceptances of these terms and conditions. InvenSense, Inc. (the “Company,” “InvenSense,” “we,” “our”) may revise these Terms of Use from time to time at its sole discretion. By using this Website, you agree to be bound by such revisions. We strongly recommend that you visit this page from time to time to review the then-current Terms by which you are bound. If at any time you do not agree to these Terms of Use, please do not access any part of this Website.

 

Privacy Policy and Cookie Policy

The InvenSense Privacy Policy is included in these Terms of Use and constitutes a part thereof.

 

General Use

The information posted on the Website and other content that constitutes the Website, in whole or in part (including, but not limited to, texts, photos, designs, and logos), are protected by the laws and regulations of various countries and by treaties. Use of this information (including reproduction, modification, uploading, display, transmission, licensing, and sale) for purposes other than personal use or other uses permitted by law is prohibited without InvenSense’s prior written consent.

As allowed by robots.txt protocol, a crawler can be used solely for the purpose of crawling the Website, but InvenSense may, at its discretion, block any crawlers.

InvenSense may, at its discretion, block any suspicious IP address in order to continue provision of services on the Website or to maintain its safety.

 

Copyrights and Trademarks

All content (including software) provided on the Website is copyrighted material of InvenSense and its affiliates, all rights reserved. All provided software must be used in accordance with the applicable software user license agreements and applicable laws, regulations, and treaties.

“InvenSense”, “Chirp”, and “TDK” trademarks, logos, and the names of InvenSense, Chirp, and TDK products mentioned on the Website are registered and nonregistered trademarks of InvenSense and its affiliates. Other product and company names are the trade names, trademarks, or registered trademarks of their respective holders. Nothing contained on the Website should be construed as granting any license or right to use any trademark displayed without the explicit written permission of the party that owns the trademark.

 

Availability

Any information posted on the Website may be about products, services, or applications and software not published or offered in a customer’s country. This information does not necessarily mean the intention of InvenSense to publish or offer these products, services, or application software in a customer’s country. For information about products, services, or application software available in any country, please consult your InvenSense sales or account representative.

InvenSense reserves the right to change or discontinue at any time, without notice, any products, software, applications, or specifications described on this Website.

 

InvenSense Developers Corner

A registered member can have one account. Unless InvenSense approves separately, a registered member cannot have two or more accounts.

 

  • Access

Access to certain products and services offered through the InvenSense Developers Corner requires that you register and create an account and is at your own risk. This access and account is provided as a courtesy, and we reserve the right to withdraw or amend the provided functionalities at any time and without prior notice.  InvenSense is not liable for any unavailability of the account or access at any time or for any period and we reserve the right to restrict access to any part of the  Website (in whole or in part) to registered users at our option and discretion.

Conditions for registration include the following:

    • You are 18 years of age or older;
    • You agree to the Terms of Use;
    • You agree to the Software License Agreements;

Unauthorized individuals attempting to access these areas of the Website may be subject to prosecution.

 

  • Use

Any information, comments, or materials you provide will not be deemed confidential. By sending information or materials to InvenSense or through the Website, you grant InvenSense an unrestricted, irrevocable license to use, reproduce, display, perform, modify, transmit, or distribute such materials or information. You agree that InvenSense is free to use any ideas, concepts, know-how, or techniques that you may share through the Website (including any information disclosed in the discussion forums or message boards).

 

  • Management of Account and Password

Your Developers Corner account is personal to you and you agree to assume all responsibility for any activities (including downloads) using your account. When registering an account, you will need to choose and set log-in credentials and provide additional pieces of information as may be required. All such information should be treated as confidential and you must not disclose it to any third party. In completing your account registration, you represent that all information you have provided is true and accurate and that it is your responsibility to keep your registered information up to date. Termination or deletion requests can be submitted to privacy@invensense.com.

 

  • Change to Registered Information

In the event there is a change to registered information supplied at the time of registration, the registered member must immediately change the registered information (some information such as email address cannot be changed). When it is apparent that registered information is incorrect (company name, zip code and address, etc.), InvenSense may correct it at its sole discretion.

 

Prohibitions

You are prohibited from posting or transmitting to or from this Website any unlawful, threatening, libelous, defamatory, obscene, pornographic, or other material that would violate any law in any jurisdiction.

 

Indemnification

You agree to indemnify, defend, and hold InvenSense and its affiliates, officers, agents, employees, and vendors, harmless from any claim or demand, including court costs and reasonable attorneys’ fees, made by any party due to or related to any content you submit, post, transmit or make available through the Website, your violation of these Terms of Use, or your violation of any rights of another. This includes, but is not limited to, any claim of libel, defamation, obscenity, negligence, violation of rights of privacy or publicity, loss of service by other users of the Website, property damage, and infringement of intellectual property or other rights. InvenSense will timely notify you of any claim for which it seeks indemnification. You will be afforded the opportunity to participate in the defense of such claim, provided that your participation is not deemed obstructive or prejudicial to InvenSense’s interests, as determined at InvenSense’s sole discretion.

 

No Warranties

ALL WEBSITE CONTENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, TITLE, NONINFRINGEMENT OF INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL INVENSENSE OR ITS AFFILIATES OR SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE WEBSITE OR CONTENT PROVIDED WITHIN EVEN IF INVENSENSE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

InvenSense takes due care regarding information posted on the Website. Nonetheless, InvenSense makes no warranty concerning the accuracy, validity, reliability, suitability, for a particular use, or safety (including termination of function, correction of errors, and absence of computer virus or other harmful elements on the Website or servers) of the information made available on the Website. InvenSense shall not be liable for any harm resulting from the use of information on the Website or the inability to use such information.

 

Disclaimer

InvenSense may, without prior notice, change the content of the Website, or suspend or terminate its operation. InvenSense shall not be liable for any harm resulting from any changes or lack of update to the content of the Website or from suspension or termination of its operation.

 

Links to Third-Party Sites; Third-Party Materials

Our Website may contain links to non-InvenSense websites. These links are provided as a convenience, and InvenSense assumes no responsibility for the content of any third-party website. In addition, our Website may include articles, content, and materials compiled by other companies and introductions to websites and products or services operated by other companies. In no event shall InvenSense be responsible in any way for such materials. Any non-InvenSense website accessed from the Website is independent from InvenSense; InvenSense shall not be liable for any harm resulting from the use of or inability to use such information.

References or links to any third-party website, product, or service does not imply any endorsement or approval by InvenSense of that third party or of any product or service it provides.

 

Export

The United States controls the export of products and information. You agree to comply with such restrictions and not to export or re-export the materials you may obtain from the Website to countries or persons prohibited under US export control laws. By downloading any materials, you represent that you are not in a country where such export is prohibited and that you are not on the US Commerce Department’s Table of Denial Orders or the US Treasury Department’s list of specially-designated Nationals.

 

Applicable Law

This Website is controlled by InvenSense from its offices within the United States of America. Unless otherwise provided, interpretation and use of the Website and the Terms of Use shall be governed by the laws of California, USA, and applicable federal laws, without giving effect to the conflicts of laws principles. If any provision of these Terms of Use is determined to be unlawful, invalid, or unenforceable, the validity and enforceability of any other provision shall not be affected. All disputes arising out of the use of the Website shall be submitted to the exclusive jurisdiction of and venue in the state and federal courts located in Santa Clara County, California, and both parties hereby consent to the personal and exclusive jurisdiction and venue of these courts.

Password and confirm password is not same.

All fields are required