The ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5 × 3 × 0.91 mm (14-pin LGA) package.

  • High performance specs
    • Gyroscope sensitivity error: ±1%
    • Gyroscope noise: ±4mdps/√Hz
    • Accelerometer noise: 100µg/√Hz
  • Includes 1K-byte FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode
  • EIS FSYNC support

ICM-20600 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I²C and high speed SPI at 10MHz.

Product Details

Part # Gyro Full Scale Range Gyro Sensitivity Gyro Rate Noise Accel Full Scale Range Accel Sensitivity Digital Output Logic Supply Voltage Operating Voltage Supply Package Size
UNITS: (°/sec) (LSB/°/sec) mdps/rtHz (g) LSB/g (V) (V) (mm)
ICM-20600
ICM-20600
±250
±500
±1000
±2000
131
65.5
32.8
16.4
±4mdps/√Hz ±2
±4
±8
±16
16384
8192
4096
2048
I²C or SPI VDD 1.71 – 3.45 2.5 × 3 × 0.91

Documentation & Resources

Features

  • 3-Axis Gyroscope with Programmable FSR of ±250dps, ±500dps, ±1000dps and ±2000dps
  • 3-Axis Accelerometer with Programmable FSR of ±2g, ±4g, ±8g and ±16g
  • User-programmable interrupts
  • Wake-on-motion interrupt for low power operation of applications processor
  • 1K byte FIFO buffer enables the applications processor to read the data in bursts
  • On-Chip 16-bit ADCs and Programmable Filters
  • Host interface: 10MHz SPI or 400kHz Fast Mode I²C
  • Digital-output temperature sensor
  • VDD operating range of 1.71 to 3.45V
  • MEMS structure hermetically sealed and bonded at wafer level
  • RoHS and Green compliant

TPI car

row of bicycles

TRACK map 2

TRACK map

    Contact Us Directly

    If you would like more information about our Trusted Location Solutions, please fill out the information below and we will get back to you as soon as we can.










    RIDE map

    loading