Home  ›  Solutions  ›  SmartPressure  ›  ICP-10125

ICP-10125

High Accuracy, Low Power, 10 atm Waterproof Barometric Pressure & Temperature Sensor IC

The ICP-10125 pressure sensor is based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step.

Consuming only 1.3 μA @1 Hz, the device is available in a small footprint 3.55 × 3.55 × 1.45 mm chimney package with waterproofing gel providing IPx8 waterproofing to 10 atm. The ICP‑10125 is ideally suited for wearable fitness monitoring and battery powered IoT.

The ICP-10125 offers an industry leading temperature coefficient offset of ±0.5 Pa/ºC. The combination of high accuracy, low power, temperature stability, waterproofing in a small footprint enables higher performance barometric pressure sensing for sports activity identification and mobile indoor/outdoor navigation.

ICP-10125


Target Markets

  • Wearable Fitness Monitoring
  • E911
  • Mobile Phones
  • Drones



Product Details

Product
 
Package Size
(mm)
Waterproof
 
Range
(kPa)
Power
Consumption

(µA)
Digital
Output

 
Logic
Supply Voltage

 
Operating
Voltage Supply

 
Status
 
Purchase
 

ICP-10125
3.55 × 3.55 × 1.45Yes, 10 atm30 – 1101.3I²C1.8V1.8VProduction

DK-10125
SmartPressure™ Development Kit for ICP-10125 Pressure Sensor

Applications

Wearable Fitness Monitoring

E911

Mobile Phones

Drones

Support for IPX8 waterproofing protects the device up to 10 ATM. This will offer a new level of device confidence in this ever-ruggedizing industry, and is perfect for tracking all kinds of fitness activity.

With its accurate measurement and low power consumption, our pressure sensors enables support for E911 service for Smartphone, Tablets and other mobile devices. It easily exceeds the +/-3m height accuracy (e.g., floor determination) specified by FCC for E911 (emergency) calls.

With mobile phones in almost everyone’s pockets, using our MEMS pressure sensors makes indoor positioning even more accurate as well a providing the best elevation data for exercise activities.

With waterproofing and small footprints our MEMS pressure sensors are great for the needs of drones, which require the most efficient ratio of weight to power distribution, and operate in various weather conditions.

Features & Benefits

  • Pressure operating range: 30 to 110 kPa
  • Noise and current consumption:
    • 0.4 Pa @ 10.4 μA (ULN mode)
    • 0.8 Pa @ 5.2 μA (LN mode)
    • 3.2 Pa @ 1.3 μA (LP mode)
  • Pressure Sensor Relative Accuracy: ±1 Pa for any 10 hPa change over 950 hPa – 1050 hPa at 25ºC
  • Pressure Sensor Absolute Accuracy: ±1 hPa over 950 hPa – 1050 hPa, 0ºC to 65ºC
  • Pressure Sensor Temperature Coefficient Offset: ±0.5 Pa/ºC over 25ºC to 45ºC at 100 kPa
  • Temperature Sensor Absolute Accuracy: ±0.4ºC
  • IPx8: Waterproof to 10 ATM
  • Temperature operating range: -40°C to 85°C
  • Host Interface: I²C at up to 400 kHz
  • Single Supply voltage: 1.8V ±5%
  • RoHS and Green compliant

Documentation & Resources

Datasheet / Product BriefVersionUpdatedDownload
DS-000329 – ICP-10125 Datasheet1.12021-04-09Datasheet

Software
(Note: Account required to download)
VersionUploadedDownload
SmartMotion Installer w/ MotionLink4.2.152024-02-15Download Zip File
DK-101xx SmartMotion eMD1.2.1Download Zip File


    Contact Us Directly

    If you would like more information about our MEMS Pressure Sensors, please fill out the information below and we will get back to you as soon as we can.